TorginolSignature Collection
Creekbed FB-716
Creekbed (FB-716) is a Torginol Signature Collection flake blend of rich brown, mineral gray and clean white, broadcast into resinous floor systems.
- Zero VOC
- Water based resin flake
- Nine color blend
- Components rated Good lightfastness
Available in
1/4 in 1/8 in 1/16 in 40LB box
System Stage
Broadcast Full, heavy or light
Used For
Resinous floor systems Resinous wall systems
Description
Overview
Creekbed (FB-716) is a decorative flake blend in Torginol’s Signature Collection. Torginol describes it as inspired by a sunlit stream, layering rich brown, mineral gray and clean white with subtle red and yellow undertones. The blend is 25% Wigwam (F5116), 25% Antique White (F9959), 25% Stone (F9987), 10% Tabu (F5305), and 3% each of Adobe Beige (F1000), Cocoa Brown (F1100), Putty (F5115), Porpoise (F5306) and Gravy (F9982).
Torginol POLYMER FLAKE is made from water based resin materials, organic minerals, additives and pigments. It is broadcast into a resinous floor or wall coating system, and Torginol recommends a clear topcoat to fully encapsulate the flake. All nine component colors carry Torginol’s Good lightfastness rating. Torginol does not publish an indoor or outdoor rating for the blend itself.
Key Features
- Nine color blend: F5116, F9959, F9987, F5305, F1000, F1100, F5115, F5306, F9982
- Three sizes: 1/4, 1/8, 1/16 in
- Zero VOC, water based chemistry
- Lab tested resin compatibility (five resin types)
Typical Uses
- Decorative broadcast layer in resinous floor systems
- Resinous wall coating systems
Photos
Videos
FLAKE Installation Overview
Learn how to install Torginol decorative flakes.
Specifications
Coverage varies by system and application. See Torginol’s Coverage Calculator.
| Spec | Value |
|---|---|
| Product type | Decorative flake blend (Torginol POLYMER FLAKE) |
| Item code | FB-716 |
| Collection | Signature Collection |
| Blend | Wigwam F5116 25%, Antique White F9959 25%, Stone F9987 25%, Tabu F5305 10%, Adobe Beige F1000 3%, Cocoa Brown F1100 3%, Putty F5115 3%, Porpoise F5306 3%, Gravy F9982 3% |
| Sizes | 1/4 in, 1/8 in, 1/16 in |
| Material | Water based resin materials, organic minerals, additives, pigments |
| VOC | Zero VOC (TDS); Not Volatile (SDS) |
| Interior or exterior | Not published by manufacturer for this blend. All nine components are rated Good lightfastness; Torginol states colors with good lightfastness may be suitable in exterior applications, as determined by the coating system’s UV stability. |
| Resin compatibility (lab tested, Pass) | Epoxies, MMA, polyaspartics, polyureas, polyurethanes; 100% solids, solvent based and waterborne systems. Test any other resin before use. |
| System use | Broadcast into a resinous floor or wall coating system; clear topcoat recommended to fully encapsulate the flake |
| Package | 40LB box (18.14 kg net) |
Show all specifications (12 more)
| Composition (SDS) | Barium sulfate 35 to 45%, calcium carbonate 35 to 45%, proprietary resins 10 to 20%, titanium dioxide 0 to 10%, pigments under 3% |
|---|---|
| Shape | Random (ASTM D4086) |
| Dry film thickness | About 5 mils (ASTM D1005) |
| Sheen | Under 15 units, 60° gloss meter (ASTM D523) |
| Opacity | Over 98%, Pass (ASTM D6762) |
| Lightfastness | Blend: Not published by manufacturer. Components: Good, all nine (ASTM G155, 1,000 hour xenon arc) |
| Specific gravity | 1.6 to 3.1 g/cc |
| Storage | Airtight poly bag, dry environment, room temperature |
| Hazard classification | Not hazardous under OSHA Hazard Communication Standard |
| Limitations stated | Finer particles present; does not protect against efflorescence |
| Shelf life | Not published by manufacturer |
| Made in | Not published by manufacturer |
System Compatibility
Torginol lists lab tested compatibility (Pass) with these resin types, in 100% solids, solvent based and waterborne systems.
- Epoxies
- MMA
- Polyaspartics
- Polyureas
- Polyurethanes
Always confirm with the coating manufacturer’s system specification.
Sources
Facts on this page are summarized from these manufacturer sources.
Show all sources (9)
- Torginol product page, Creekbed (FB-716): https://torginol.com/products/creekbed (accessed November 1, 2026)
- Torginol POLYMER FLAKE Technical Data Sheet, Feb 2025 (V25010001): https://assets.torginol.com/uploads/Downloadable-Resources/POLYMER-FLAKE-TDS-2025.pdf (accessed November 1, 2026)
- Torginol POLYMER FLAKE Safety Data Sheet, June 2025: https://assets.torginol.com/uploads/Downloadable-Resources/FLAKE-SDS-2025.pdf (accessed November 1, 2026)
- Torginol POLYMER FLAKE Signature Collection color card: https://assets.torginol.com/uploads/Downloadable-Resources/flake_Signature-blends-collection-card_v23010602-S.pdf (accessed November 1, 2026)
- Torginol FLAKE Color and Design Guide 2023: https://assets.torginol.com/uploads/Downloadable-Resources/2023_FLAKE_Color_Guide_v_23010001_rfs.pdf (accessed November 1, 2026)
- Torginol FAQs: https://torginol.com/resources/faqs (accessed November 1, 2026)
- Torginol US, FLAKE Installation Overview (YouTube): https://www.youtube.com/watch?v=klyhA8fNjk8 (accessed November 1, 2026)
- Torginol Coverage Calculator: https://torginol.com/resources/coverage-calculator (accessed November 1, 2026)
- Torginol company history: https://torginol.com/company/history (accessed November 1, 2026)
Last verified: November 1, 2026 against the sources listed.
Coated is an independent industry resource and does not manufacture or sell this product. Specifications are summarized from the manufacturer’s published documents listed above and may change without notice. Always follow the current manufacturer data sheet and safety data sheet for your project.
Where to Buy
Check each seller’s site for current availability.
View on Torginol SiteManufacturer
Find a Distributor (Torginol)Manufacturer locator
Coated is independent and does not sell this product. Coated does not rank or endorse sellers.
Resources
Official Torginol documents (PDF). Each opens in a new tab.
Torginol POLYMER FLAKE
Signature Collection Colors
9 blends. Blends are marked.
WaxwingFB-968
ThymeFB-977
WombatFB-616
Tidal WaveFB-807
CoyoteFB-513
GravelFB-414
CreekbedFB-716
LoonFB-966
NightfallFB-715
How it is used
About POLYMER FLAKE
- Clear topcoatRecommended by Torginol to fully encapsulate the flake and provide a durable wearing surface
- Broadcast POLYMER FLAKE
- Base coatEpoxy, polyaspartic, polyurea or another compatible resin system
- Broadcast into many resinous flooring systems.
- Made from water based resin materials, organic minerals, additives and pigments.
- Over 150 color styles and six sizes.
Brand
Torginol
- Founded in 1961.
- Torginol, Inc., Sheboygan, Wisconsin, USA.
- Makes the decorative components of resinous floors, not the coatings.
- Sells its products for professional use, internationally.
Find an Installer
Looking for someone to install this product? Browse coating installers in the Coated directory.
Find an InstallerShare this Product
Additional information
| Collection | |
|---|---|
| Blend components | Wigwam F5116 25%, Antique White F9959 25%, Stone F9987 25%, Tabu F5305 10%, Adobe Beige F1000 3%, Cocoa Brown F1100 3%, Putty F5115 3%, Porpoise F5306 3%, Gravy F9982 3% |
