Coverage calculator
Plan how much primer, base, broadcast media and topcoat to order for a coated floor. Every number is editable, so you can work from the technical data sheet for the exact product on your job.
- 1Add the areas you are coating
- 2Build the system one coat at a time
- 3Set your waste factor
- 4Order whole packages, see what is left over
Coverage estimate
Job setup
Saved on this deviceA preset only fills in the coat list. You can change, add or remove any coat afterward.
1Areas
Rename, resize or remove any area. Mark cutouts as Subtract.2System builder
Drag or use the arrows to reorder. Each coat is calculated on its own.3Waste factor
Extra material for mixing loss, edges and porous slabs, added to every coat unless you override it on a coat. One manufacturer article suggests adding 10 to 15%. Source
4Order list
EstimateEach coat is rounded up to whole packages on its own, and packages for different products are never added together. Leftover is what you should have left if the full waste allowance gets used.
Check the technical data sheet
These results are estimates, not a guarantee. Always confirm coverage, mix ratios, film thickness and package sizes on the manufacturer's technical data sheet (TDS) for the exact product you are installing, and follow its instructions.
Real use changes with surface profile, slab porosity, temperature, tools and technique. Coated Network does not guarantee quantities.
