A non-slip additive is a fine grit, such as aluminum oxide or silica sand, mixed into or broadcast onto a coating to add traction. It reduces slip hazards on floors that get wet, greasy, or heavily trafficked.
A non-slip additive is a fine aggregate, such as aluminum oxide, polymer beads, or silica sand, blended into a topcoat or broadcast onto a coating to increase surface traction. It is added specifically to reduce slip hazards on floors that get wet, greasy, or heavily trafficked.
Types of Non-Slip Additives
Aluminum oxide grit offers strong, long lasting texture and is common in industrial settings, while polymer beads give a smoother, less abrasive grip often used in showers or pool decks. Silica sand is a lower cost option frequently used in garage and warehouse coatings.
Non-Slip Additive vs. Textured Topcoat
A non-slip additive changes the texture of the coating itself, while a textured topcoat is a separate product formulated with built-in texture. Additives give installers more control over grip level, since the amount broadcast can be adjusted by area and traffic type.
Practical Tips for Adding Slip Resistance
Match the additive size and amount to how the space is used, since too much grit makes floors hard to clean while too little will not meet safety needs. Always broadcast additives evenly and seal them with enough topcoat so they stay locked in rather than working loose over time.
